3M

8090

3M™ Spray Trim Adhesive securely attaches lightweight trim materials such as upholstery cloth and trunk liners to a variety of surfaces. This adhesive is recommended for positioning applications where mechanical fasteners will be added later. The aerosol spray makes applications easy for both automotive and household uses.

8088

3M™ General Trim Adhesive bonds automotive materials such as carpeting, vinyl, fabrics, and plastics to metal and other hard, impervious surfaces. This high-strength adhesive offers good heat and water resistance.

Formulated to glue soft materials to hard surfaces

3M™ General Trim Adhesive creates a secure bond when gluing soft materials such as carpet, vinyl, fabric and plastic to hard impervious surfaces. Our clear-drying, high -strength adhesive (PDF, 75 Kb) delivers professional quality results when making automotive repairs. This product is commonly used for automotive restoration work. Once the adhesive sets, the bond offers good heat and water resistance.

8061

3M™ Plastic and Emblem Adhesive permanently bonds plastic and metal emblems, rigid plastic parts, taillight lenses, trim strips, and other parts for both interior and exterior applications.

Strong, plastic or metal emblems, interior rigid plastic, tail light lenses, vinyl side moldings or upholstery

8115

3M™ Panel Bonding Adhesive is a cost-effective two-part epoxy adhesive for bonding replacement body panels. From its fast, convenient cartridge system the adhesive seals and bonds steel, aluminum, SMC, and FRP securely in a single operation.

3M™ Static Mixing Nozzle is a cascade mix/meter nozzle for an easy squeeze of adhesive right on target. This static mixing nozzle is engineered for use with 3M cartridges and manual or pneumatic applicators.

8631

3M™ Urethane Seam Sealer is a high solids seam sealer ideal for sealing automotive and RV seams and joints. It adheres well to bare metal, primed metal and painted surfaces, and if desired can be smoothed to a featheredge and/or brushed. Tack free and paintable after 30-45 minutes, this urethane formula is permanently flexible and offers superior performance to solvent-based sealers.

8531

3M™ Heavy Drip-Chek™ Sealer is a heavy-based sealer specifically designed for filling exterior auto body definition seams including roof drip rails on older vehicles. Weather-resistant sealer is non-sagging – ideal for vertical seams – and adheres to metal, rubber, glass and painted surfaces. It can be applied up to 1/8” wide. Controlled shrinkage provides excellent visual definition seams.

8571

3M™ Standard, Performance and Premium Manual Applicators provide fully portable application of 2-part adhesives for auto maintenance and repair jobs. Designed for use with 3M cartridges as small as 37.5 mL, these applicators dispense correctly mixed two-part bonding agents with no measuring – maximum efficiency on individual repair orders or where very little space or equipment is available.

8609

3M™ Windo-Weld™ Super Fast Urethane securely bonds replacement auto glass to car bodies, including windshields, backlites and sidelites. Formulated for convenience, this medium viscosity adhesive is a single-component, moisture-curing product that requires no mixing, which is an advantage because many windshield replacements are done at the customer's location away from the shop.

8690

3M™ Fast Cure Auto Glass Urethane is a one-part, moisture-curing, auto glass urethane that produces an extremely fast-cure. This adhesive offers high viscosity for accurate placement and high bond strength to meet a variety of application strength requirements. This urethane adhesive is ideal for those applications that require a fast cure and strong hold, such as windshield bonding.

8693

3M™ Auto Glass Urethane Windshield Adhesive is a medium viscosity, one-part, moisture-curing urethane adhesive. This adhesive is formulated to be fast-curing and non-sagging for rapid results and a clean and simple application process. The features of this windshield adhesive produce high-strength material designed to bond and seal vehicle windshields, backlights and sidelights.

8984

3M™ General Purpose Adhesive Cleaner removes adhesive residue with ease. Its special formula is tough on adhesive residue but gentle on paint, vinyl and fabric when used as directed. This adhesive cleaner is available as a spray-on aerosol or in a 1-quart can for convenience.

5955

3M™ Super Duty Rubbing Compound is an aggressive compound that removes 1000 and finer sand scratches on all types of paint surfaces and gelcoats. This compound remains wet on the job with little or no mess, maintains high rate of cut with constant pressure and buffs to high gloss with minimum effort. It can be used by hand or machine.

5766

3M™ Cream Hardener mixes with 2-part fillers, putties and glazes to create high-quality, long-lasting repairs. When filler and hardener are mixed, a chemical reaction occurs to create a mixture that will deliver a strong, lasting repair. This hardener is smooth and easy to mix in.

19890

3M™ Neoprene High Performance Contact Adhesive 1357 is a versatile, solvent-based adhesive that offers fast handling strength, water resistance, and high-temperature performance up to 250 °F (121 °C). While commonly used for bonding most metals and plastics, it is also suitable for large surface panels or composite lamination. This adhesive dries quickly while allowing time for positioning and adjustments, making it ideal for applications involving materials such as metal honeycomb composite, stainless steel, and wood panels.

20

3M™ Heavy Duty 20CA Spray Adhesive is a clear, high-strength adhesive that bonds a range of large surfaces and is perfect for large-scale laminations. It shows aggressive initial tack with an extended open bond time of up to one hour.

20058

Bondo® All-Purpose White Cream Hardener mixes with 2-part fillers, putties and glazes to create high-quality, long-lasting repairs. When filler and hardener are mixed, a chemical reaction occurs to create a mixture that will deliver a strong, lasting repair. Our hardener is smooth and easy to mix with fillers, putties and glazes.

21210

3M™ Super 77™ Multipurpose Spray Adhesive has an aggressive tack that offers a high initial grab as well as sufficient open time to position materials properly. High-solids content supports its low soak-in property, giving you time to find the best fit for your parts. This attribute also provides higher coverage than competing spray adhesives and helps create soft, non-dimpling glue lines. The combination of fast tack, strong bond and clean appearance make it ideal for projects of all kinds.

24

3M™ Foam & Fabric 24 Spray Adhesive is an economical, fast-drying spray adhesive that bonds foam and fabric to a wide range of substrates. The permanent bond provides fast results to keep projects moving ahead. The non-yellowing formula dispenses easily in a lace-spray pattern and applies directly onto surfaces and materials where needed.

25024

3M Scotchcast Inline Resin Power Cable Splice Kit 82-A1N is designed to insulate and seal 5kV rated unshielded, single conductor cables and 1kV rated multiple conductor cables. Quickly and easily insulate and create a permanent watertight seal for use in weather-exposed or direct-burial locations without the need for heat or additional tools. Designed to not melt or run once cured and stable at elevated temperatures. Two-part closed mixing pouch simplifies mixing and pouring, generating its own heat to cure. Includes a mold body, pouring spouts, 23 electrical tape and No. 4N resin. UL listed for direct burial and submerged applications up to 600 V and 90 C. For use with UL listed connectors only.

27

3M™ Multipurpose Spray Adhesive 27 is an economical, versatile, fast-drying adhesive that bonds a wide range of lightweight materials, including paper, corrugated board, fabric, insulation, plastic, metal, wood, and more. Its permanent bond provides fast results, while its formula applies directly onto surfaces and materials. Offering both a high initial grab as well sufficient working time for repositioning, this easy-to-dispense option helps create soft, non-dimpling glue lines. Use 3M™ Multipurpose Spray Adhesive 27 across a variety of applications, including general maintenance and repair projects; attaching fiberglass insulation and drywall corner beads; bonding thin films; foils and fabrics; and installing acoustic panels.

27824

3M™ Stikit™ Paper Roll 426U is an abrasive sheet stock constructed on an A-weight, light paper with pressure sensitive adhesive (PSA) backing and features an anti-loading coating. Silicon carbide abrasive and lightweight paper backing make this an ideal product for finishing applications such as paint prep, white wood sanding, sealer sanding, and solid surface finishing.

30023

3M™ Hi-Strength Spray Adhesive 90 is an extremely versatile, fast-drying spray adhesive that bonds strongly to a wide range of materials. This product's permanent bond provides fast results while remaining easy to dispense thanks to a variable-width spray pattern. The high-solids content of this adhesive offers a high initial grab, sufficient bonding range, and a fast dry time. 3M™ Hi-Strength Spray Adhesive 90's combination of maximum-strength bonding and clean appearance makes it ideal for projects of all kinds, such as general industrial maintenance and repair projects; large-surface bonding of wood, laminates, MDF, and other substrates; and bonding for tilt-up construction.

33181

3M™ Quick Grip Filler is an extra fast, easily sandable body filler that adheres rapidly to most substrates including galvanized steel, aluminum, E-coat and many more. This creamy, easy-to-spread filler is vacuum processed to reduce pinholes and sands to a fine featheredge without loading abrasives. It cures in 15 minutes at 75°F, and sands to a stain-resistant, tack-free finish.

3M-74 CYLINDER

3M™ Foam Fast 74 Cylinder Spray Adhesive is a fast-drying spray adhesive that bonds foam and fabric to a wide range of substrates. Its permanent bond provides fast results to keep projects moving ahead. The non-yellowing formula dispenses easily in a lace-spray pattern and applies directly onto surfaces and materials where needed.

Fast-Acting, Long Lasting 3M™ Foam Fast 74 Cylinder Spray Adhesive is a long-time member of 3M's portfolio of go-to, everyday-use adhesives considered by many to be necessary at the factory. For many, "getting the job done" is just a spray away. Our 3M™ Foam Fast 74 Cylinder Spray Adhesive has an aggressive tack that offers a high initial grab with foam-tearing strength, yet allows sufficient open time to position materials properly.

6041

3M™ Adhesive Remover Citrus Base is ideal for helping dissolve and remove adhesive residue left behind by tapes, labels, stickers and other non-curing adhesive materials. It cleans without streaking and has shown to be excellent for cleaning a wide variety of industrial materials.

78327

3M™ Multipurpose Spray Adhesive 27 is an economical, versatile, fast-drying adhesive that bonds a wide range of lightweight materials, including paper, corrugated board, fabric, insulation, plastic, metal, wood, and more. Its permanent bond provides fast results, while its formula applies directly onto surfaces and materials. Offering both a high initial grab as well sufficient working time for repositioning, this easy-to-dispense option helps create soft, non-dimpling glue lines. Use 3M™ Multipurpose Spray Adhesive 27 across a variety of applications, including general maintenance and repair projects; attaching fiberglass insulation and drywall corner beads; bonding thin films; foils and fabrics; and installing acoustic panels.

8001

3M™ Yellow Super Weatherstrip and Gasket Adhesive securely bonds rubber gaskets and weatherstripping to metal surfaces. This flexible, high-strength adhesive helps ensure a tight waterproof seal on car doors, trunks, sun roofs and more. It cures fast and works right out of the tube, holding rubber weatherstripping in place and resisting heat, vibration, oils and detergents.

82242

3M™ Foam Fast Spray Adhesive 74 is a fast-drying adhesive that bonds foam and fabric to a wide range of substrates. While offering an aggressive tack with a high initial grab and foam-tearing strength, this adhesive allows sufficient open time to position materials properly thanks to its high-solids content and low soak-in properties. It also provides high coverage and helps create soft, non-dimpling glue lines. Additionally, 3M™ Foam Fast Spray Adhesive 74 dispenses easily in a lace-spray pattern and applies directly onto surfaces, making it a quick, 'go-to', everyday-use solution.